For proper use, kindly read the user manual first

This power bank is divided into two independent sections:

Left Section:
7.4V/5A Output Port, Two 5V/2A USB Output Ports (for charging devices like phones, flashlights, etc.)

Right Section:
11.1V/9A XT60 Output Port, Dedicated Charging Port for recharging the power bank itself.

2. Check Battery Level

Press the power button once → The indicator light will show the current battery level.

3. Power Output Mode

Press and hold the power button for 2 seconds → Start power output mode (default is 7.4V/5A from the left section). Press the button once → You can switch between the 7.4V/5A and 11.1V/9A output modes. The indicator light will show the current output voltage.

4. Operation Status Indicator

When a battery or device is connected to either the DC (7.4V/5A) or XT60 (11.1V/9A) port, the indicator light will change from green to red, indicating that the device is supplying power. Once the device is fully charged, the indicator light will automatically return to green.

5. Stopping Power Output

Press and hold the power button for 2 seconds → Immediately stops the power output. If no load is detected on the 7.4V/5A or 11.1V/9A ports within 2 minutes, the device will automatically shut off the output to save power.

6. Charging the Power Bank

Use only a ≤12.6V / 10A charger to charge the power bank. Do not use a charger with higher voltage or current to avoid damaging the battery or creating safety risks.

7. USB / Type-C Output

The Type-C and USB 2.0 ports in the left section support plug and play (5V/2A). These can be used to charge devices like phones, flashlights, and other small digital devices.